Yamaha CP3 Sprocket Guard
MT09 (21-Current), XSR900 (22-Current), R9 (Current Gen)
 
Made from 6061 aluminum and clear anodized
Designed to also accommodate the Racetorx Shift Shaft Support
 
Install Instructions:
All 3 screws will need blue loctite
All 3 screws will need threads started before full tightening.  Start with the upper left screw first, followed by the upper right and the lower one last
Fully tighten in same order 
Note: If your motor has the metal clips to secure the vent/overflow hoses you may have to remove that first for install
 
 
**FOR OFF-ROAD USE ONLY**